Small Update

Since I last wrote, I finished cleaning the carburetors on the 1997 GSX-R1100W I have. I wish I took pics but it's pretty straightforward.

My preferred method of cleaning is Evinrude Engine Tuner:

Followed by some brake clean and then compressed air. Be careful not to get those chemicals on your skin - it will burn. 

So I put them together and all of a sudden the choke cable didn't fit. I cut it from the lever on the clip on just so I can get the bike started. 

After hooking up all the lines, I put some gas in it and turned the petcock to prime. Aaand it started leaking. Figures. The bike sits for 5 years with bad gas in the tank and no leaks but as soon as it has an inkling of coming back to life, it starts leaking. Typical.

So I bought a rebuild kit which was specified for a 1993-1994 GSX-R1100W as the OEM Suzuki numbers cross over. I put it all back together and it leaked from everywhere. I bit the bullet and bought a brand new OEM Suzuki unit from Motosport.com; they even had it in stock! It should be here tomorrow so I can finally get it going. 

In other news, I bought two bikes recently. 

First one is a 1998 Honda VFR800 in lovely Italian Red:

It was sat behind a house just north of Boston. If you've read the first couple posts, you'd see that I've had a couple of the earlier generations of VFRs. They are great bikes. This generation 800 was the first of the fuel injection. I got it for a very good price. It needs tires and a mirror. The tires and mirror just got here today so it will be for sale soon! 

I spent a day polishing the oxidation and general dirt off of it:

The Italian Red shines up pretty well I must say. It's strange, I can almost feel the paint is thinner than on my 1993 CBR900RR. Honda cutting costs perhaps? 

A while ago you may remember I posted about a red, white and blue 1993 CBR900RR at a dealer for a good price that I was looking to pick up. The deal fell through on account of a very flaky dealer. But as of last night, the situation has been rectified! 

I spotted one on Craigslist Sunday night. Pretty thorough ad:

1993 CBR900RR - Red/White/Blue color scheme. currently will not stay running. ran when it was put away 4 years ago. don't have the time to fix it or ride it so I am looking for $1500.00 OBRO. Should just need the carbs cleaned and a new battery, speedometer isn't currently hooked up. comes with extra set of rims and all components to get speedo working again. currently has newer rims on it that don't let the speedometer work. rode it that way for 3 years with no problem. Vance and hines exhaust installed, vortex sprocket and chain kit installed with only 180 miles on it 15T front and 45T rear sprocket, K&N air filter.includes extra frame, swingarm, extra front disc brakes (needed to get the speedometer working) new wheel bearings, undertail delete kit, assorted extra plastics, headlight, vortex sprocket and chain kit installed with only 180 miles on it. 1 gallon sealed Honda motor oil and any other parts I find in my garage. 

I got in contact with the owner and set up a time to take a look at it. 

I made the seller an offer andff he took it.

As far as condition goes the middle side fairings are all cracked up but repairable or replaceable but the rest of the body is near perfect. Came with a full color matched Corbin seat set up, undertail kit NIB, spare tail fairings, spare frame with swingarm and shock, 17 inch front wheel conversion, strange V&H SSR2 slip on with a flange which will be binned in favor of a stock muffler, spare blinkers. Seller bought it 7 years ago with no title and swapped it all onto a titled frame.

I'm super excited to have the first year and best color scheme of such a game changing bike plus it will look great next to my 1994 red, white and black version! 

Until next time

See you on the road!

Another Wasted Post

So I decided to go full on into the carburetors off the 1997 GSX-R1100 and replace them with all new gaskets and everything. I placed the other and have been waiting on parts since.

In other news, I put yet another engine in the 1997 GSX-R600.

I've been riding it around the past few days and I must say it feels like a new bike. Tires are perfect, suspension is spot on and the throttle response is phenomenal. I almost want to keep it. Almost. But alas, the money garnered from selling them would go further toward other bikes to rehab!

That's all there is to report currently. Please enjoy this video of the revolutionary 1993 Honda CBR900RR.

What I wouldn't give to be a buyer at that time!

Until next time,
See you on the road!

Putting In Work

I started working on the 97 GSX-R1100 today. First step was to remove the carburetors. A pretty straight forward (albeit fiddly) procedure.

Well this was interesting. The results of parting a motorcycle for 3+ years in a garage. There were even two rotting mouse corpses! That was a nice touch.

Now comes the part where I disassemble the carburetors!

First, start with a nice adult beverage and some good music. My choice of music is Q-Dance Radio and choice of beverage is the classic screwdriver:

Next is to make sure you are working in a clean, organized environment:

Normally I work from the top to the bottom as I find it easier. I keep everything organized in the proper order it was removed in: 

Next step is to flip the whole unit over and start pulling the bowls: 

I have run into this problem before, one or two bowl screw won't come undone no matter how much PB Blaster and WD-40 I use. That's when the trusty Vice-Grips come out: 

Viola: 

Next I remove ALL of the jets. In this case, these carburetors just have main jets and pilot jets:

Jets should be clean and clear. I couldn't see through ANY of mine. Tomorrow I will do the actual cleaning and reassembly!

Until next time,
See you on the road!

Couple of Updates

So I sold the little Bandit 400. I put it on Craigslist and someone gave me close to my asking price so I came out ahead. I would have really liked to fix it but I have other bikes that will net a bigger profit once fixed.

Last night I picked up the 1997 GSX-R1100 I bought last week;

I'll probably start working on it tonight. I believe it is a California model as it has lots of emission tubes and hoses.

On a closing note, the GSX-R600 I put the motor in is still for sale. I have to take it off the market because the motor I was sold is bad. The headgasket is bad and I think that is what all the running problems can be attributed to. I cleaned the carbs but they were in perfect shape when I took them apart. This weekend I'm picking up a known good engine in order to swap it out (again!).

Until next time,
See you on the road!

Long Time, No Write.

So since I last wrote, I had picked up a nice, restorable 1987 Suzuki GSX-R1100. I put it right in storage with the Honda NT650 Hawk for now, speaking of which, I was finally able to track down a fuel tank so I can bring it home and start working on it.

In other news, I picked up a very low mileage Suzuki Bandit 400. It has just 6,200 miles! It's been sitting for a few years but it has a clean title.

The seller gave me all of the items like the tank and air box.
I fiddled with it for a couple days. Realized it wasn't getting spark and the leads had broken coming off the ignition pick up so I resoldered them and now it gets spark. I think the carbs are the culprit now.



At any rate, I sold the moped for a small profit.

I had my fun with it so it was time to move on.

I took the profit plus some cash and bought this.

Bad pic, it was all I could muster in the seller's cramped garage. It's a 1996 Suzuki GSX-R1100 which is pretty close to original condition with the exception of a full Kerker exhaust with twin (!) exits. While not the most sought after series, it still holds a place in many people's hearts.As of right now, it is just going to be a flip. I got it for a decent price.

In other news, I registered and insure the 1994 Honda CBR900RR I bought back last fall. Rebuilt the carburetors and it runs flawlessly.

I still have the 1997 Suzuki GSX-R600 I put the motor in. Hoping to have that sold soon so I can put the money toward other flips.

Until next time,
See you on the road!

Some Updates!

So, in the last post I made reference to another bike I was picking up....

I replied to a Craigslist ad titled "87 GSX-R1100 - $250"
The description in the ad was sparse at best. "Not run in nearly 10 years. Parts or scrap"

Well okay fine. I guess it's worth an email. His reply was "Are you interested in restoring? This bike screamed when I first got it." So I told him I'd like to restore it and he said It'll need mirrors and paint
He attached a dark pic in his garage. For $250, I was expecting some flatblack hacked up POS or something. Pleasant surprise when it was blue and white. Even better surprise when I got there and saw how nice it really was!

I've put it right in storage for the time being.


In other news, I got that little moped running well and reliably.

Don't try this at home, folks!

I checked the clutch/transmission fluid. An itty bitty drop came out. So I filled it with the proper spec fluid. 

Tonight, I got the GSX-R600 running and riding as new. 

The choke wasn't disengaging all the way. Who knew such a small phenomena could result in such obnoxious consequences!

Bike is currently for sale at $2,500! Cleanest and lowest mileage SRAD you'll find at that price.

Until next time,
See you on the road!

Happenings.

So lately I've picked up a little Bandit 400. Supposedly, the motor is bad; yet it cranks over just fine. Seems to be a fuel issue. Pics of that will come later. I also managed to pick up a little moped - 1977 Sparta Foxi GT. Put some fresh fuel in and peddled a bit and it fired up. Needs tweaking though.


I sold my 1993 ZX7 last week as well.

I put it up for sale at $2,000 with all the spares I had - one left side fairing, one upper, two right side fairings, OEM clutch set up, Vance & Hines PowerPak, Vance & Hines ignition advancer and some other small things. The fellow I sold it to is a local who bought one brand new in 1993 and put 18,000 miles on it in 2 years! He had a child so he had to get rid of it but he wanted another one. He intends on taking it down to the frame and fully restoring it. 

Parting shot a on a very very rainy day. 

Today, I finally got around to dropping the blown up motor from the 1997 GSX-R600 I picked up in Vermont last year.

Again, ignore the stupid decal. It was on it when I bought it.

Getting there. 

And it's out!

Hey, see those two screws that are missing? The motor ate them and blew a hole in the piston!

New motor in. Only took about 4 hours from the turn of the first screw to get the new motor in. Getting it started was a different story. Took some coaxing but finally she fired up and ran well. 

Tomorrow I'm picking up another bike, check back then for an update!

Until next time,

See you on the road!